2 Channel Temperature Controller, Standalone controller
Temperature Control
- Uses PID control to maintain a constant temperature with ±0.1ºC tolerance
- Easy to control with simple interface
- For use with the SI-BMFA
Benefits
- Controls two cuvettes simultaneously
- User defined high and low alarm warnings
Applications
- Muscle physiology applications using SI-H muscle tester platforms
The SI-H Temperature Control Unit is designed for use with the SI-H line of muscle physiology research platforms. It maintains the temperature of an SI-H cuvette up to 45ºC. It is accurate to 0.1ºC. The circuit is appropriate to RTD (resistive temperature device) applications. It linearly converts a temperature reading to a voltage that is displayed as a temperature on the SI-TCM2 and can be recorded. This unit is available in a stand-alone model and as a module for the Signal Conditioning Amplifier System backplane.
Input Configuration | Current to voltage converter |
Operating Temperature Range | Room temperature |
Maximum Temperature | 45ºC |
Display Precision | 0.1ºC |
Controller Resolution | 0.1ºC |
Cuvette Temperature Sensor | 1000 Ω RTD (1000 Ω at 0ºC) |
Power Requirements | 12 V DC at 2.5A 50/60 Hz wall adaptor, 2.5 mm ID/5.5 mm OD with positive center DC barrel (included–WPI #801513) |